To discuss your project give us a call on 01392 861763


Here you’ll find our latest how to guides, videos and analysis of materials.

Breathable, Silicone finish render – Baumit SilikonTop

 Product Data Sheet Baumit SilikonTop finish render

 Safety Data Sheet Baumit SilikonTop Render

Ready to use, wet topcoat render for thin coat application. Silicone based and stain retarding decorative finish with scratched or dragged grain texture for internal and external areas. Suitable for hand or machine application. A system component of the Baumit External Wall Insulation Systems. System tested according to ETAG 004 and EN 15824.  A topcoat render application providing decoration and protection to facades.  For application over old and new mineral coatings, renovation render basecoats, concrete surfaces and mineral basecoats in the Baumit EWI Systems, EPS, XPS, XS 022 and Mineral. Properties: Technical Data: Mineral based, weather resistant, water vapour permeable, stain resistant, non-flame retarding and easy to use. Aggregate size: 1.5/2.0/3.0 mm Density: Thermal conductivity λ: Water vapour diffusion resistance µ-value: ca. 1800 kg/m³ ca. 0. 70 W/mK ca. 60 – 80 Water capillary coefficient w-value: < 0.10 kg/m²h 0,5 (W3) Sd-value: 0.12 – 0.16 m (2 mm coating) Bond strength: > 0.3 MPa Colour tones: Selected from Baumit Life colours Texture: K 1.5 K2 K3 Consumption kg/m2 : ca. 2.5 ca. 2.9 ca. 3.9 The consumption rates serve for guidance only. An allowance of 10% more consumption should be calculated in practice. Composition: Silicone resin and organic binders, mineral fillers, colour pigments, additives and water. Health and safety: Storage: Quality Assurance: Packaging: Substrate: Please refer to the Material Safety Data Sheet, produced in accordance with Article 31 and Annex II of Regulation No 1907/2006 of the European Parliament and Council from 18.12.2006, available at or alternatively request the MSDS from the manufacture

CPD Training

We offer CPD training for architects practices across Devon and Cornwall.

Software Modelling

We offer dynamic heat and moisture modelling as well as condensation risk analyses.

Building Plan Review

If you have some plans and would like our opinion on which materials would be the best for you, contact us.


Back to Earth is a natural building material supplier. We're not your typical builders'​ merchant though and instead work closely with our clients during the planning, designing and building phases of projects.

Back to Earth is a proud signatory of the Anti-Greenwash Charter:

© 2023 Back to Earth