great for buffering high humidity and adding thermal mass to a building
possibly the best sound insulation boards around
a low energy, eco friendly alternative to plaster board or other gypsum boards.
Where are they used?
As a walling or ceiling board.
Between bedrooms and bathrooms
Bathroom and kitchen ceilings
How are they used?
EBB Clay boards should be fixed using either drywall screws or stainless screws (depending on plaster to be applied) to a timber frame at a maximum of 625mm centres for walling and 417mm centres for ceiling applications.
36mm plastic washers should also be used for ceiling applications.
As with all boarding, vertical joints should be staggered by at least 1 stud to avoid cracking.
Once the EBB Clay boards are installed they can be plastered with either lime based plasters (use stainless steel fixings) or clay based plasters (normal drywall screws are fine for this).
The joints should be reinforced with 100mm wide reinforcing, bedded in the plaster.
How much will you need?
The EBB Clay boards are 1250 x 625mm and 22mm thick, they cover an area of 0.78 m2. Allow at least 5% for wastage.
This product is available by the board or by the pallet of 40 boards (10% discount on single board rate).
Each board is 1250 x 625mm or 0.78m2. Each pallet has 40 boards or 31.25m2.