an easy to use, PVC interior edging profile with fibreglass mesh welded to it’s surface.
for providing a clean edge to the render around windows, doors.
perfect for providing a permanently flexible movement joint against windows and doors.
for use with all thin layer renders from Unger-Diffutherm, Baumit, etc.
Where is it used?
The beads should be used where the plaster meets any door or window frames with our wood fibre systems but can also be used with conventional wet plaster systems.
How is it used?
The UdiREINFORCEMENT interior render edging strip should be installed prior to the main plaster coat.
Cut the beads to length and ensure the surface of the frame is clean, dry and free of dust.
Remove the peel off strip from the bottom of the sponge strip and firmly press in to place, ensuring the bead is in the correct position (once it is stuck it is not easy to move!!).
It is best to install the side pieces before the top.
Once in place, remove the yellow peel off strips on the snap off section of the bead and stick on a plastic sheet to protect the window during plastering.
When applying plasters, the base coat should reach the level of the ridged section of the bead and the finish should be level with the edge of the bead. Once the renders are dry simply remove the snap off section to create a clean edge.
How much will you need?
Each length of UdiREINFORCEMENT interior render edging strip is 2.4m long and is normally used on the heads and sides of all reveals.
These beads are available individually or in packs of 30 pcs (10% discount over individual prices).