Lithotherm tiles are a very quick, simple and cost effective way to install underfloor heating. The tiles replace a screed that is normally used in solid floor construction and uniquely provides a system combining high thermal mass with very fast surface heating times.

Lithotherm tiles are made from waste brick, which is crushed into aggregate to produce these tiles. The system can be covered with either tiles or floorboards and because it goes down as a dry system there is no waiting period before the finish can be applied.

The Lithotherm UFH system uses a high quality, Swiss made, aluminium cored pipe, which connects into a standard manifold and can therefore be combined with any heat source. It works especially well with ground source or solar sources as it is designed to run at temperatures as low as 30C rather than the higher temperatures more commonly found in underfloor systems. 

Efficiencient underfloor heating tiles - Lithotherm - backtoearthsupplies
Efficiencient underfloor heating tiles - Lithotherm from £5.91
Quick view
Aluminium cored underfloor heating pipe - Lithotherm - Back to Earth
Aluminium cored underfloor heating pipe - Lithotherm from £260.00
Quick view
Wood chip cavity fill insulation - Cemwood CW1000 - backtoearthsupplies
 - 1
Wood chip cavity fill insulation - Cemwood CW1000 from £13.54
Quick view
High density wood fibre underlay board (8mm) - UdiSTEP - Back to Earth
High density wood fibre underlay board (8mm) - UdiSTEP from £2.06
Quick view