To discuss your project give us a call on 01392 861763 or send us a message here.

Corner protection profile – UdiREINFORCEMENT

UdiREINFORCEMENT corner protection profile is:-

  • an easy to use, PVC corner profile with fibreglass mesh welded to it’s surface for strength.
  • for reinforcing all 90 degree corners around windows, doors.
  • for reinforcing all building corners.
  • for use with with all thin layer renders from Unger-Diffutherm, Baumit, etc.

Prices: from £3.68 + VAT per bead

Corner protection profile – UdiREINFORCEMENT

UdiREINFORCEMENT corner protection profile is:-

  • an easy to use, PVC corner profile with fibreglass mesh welded to it’s surface for strength.
  • for reinforcing all 90 degree corners around windows, doors.
  • for reinforcing all building corners.
  • for use with with all thin layer renders from Unger-Diffutherm, Baumit, etc.

Prices: from £3.68 + VAT per bead

“A robust corner protection profile for reinforcing all rendered corners of the Udi wood fibre systems” – Chris Brookman

 

Product overview.

Where is it used?

  • The beads should be used on all 90 degree corners formed with our wood fibre systems.
  • They can also be used with any other thin layer render system such as acrylic, silicate, silicone or polymer renders.
How much will you need?
  • Each length of UdiREINFORCEMENT corner protection profile is 2.5m long and the pieces can be joined so simply measure the total running amount of corner.

How are they used?

  • The UdiREINFORCEMENT corner protection profiles should be installed prior to the main mesh.
  • Cut the beads to length and then adhere the bead to the corner by applying a generous layer of render and seating the bead on it.
  • Trowel the bead in to the render, ensuring that the render comes up through the bead.
  • Finally, confirm that the bead is vertical and in the correct position before leaving the render to set.

Product overview.

Where are they used?

  • As a walling or ceiling board.
  • Between bedrooms and bathrooms
  • Bathroom and kitchen ceilings
  • Stud partitions

How are they used?

  • EBB Clay boards should be fixed using either drywall screws or stainless screws (depending on plaster to be applied) to a timber frame at a maximum of 625mm centres for walling and 417mm centres for ceiling applications.
  • 36mm plastic or stainless steel washers should also be used for ceiling applications.
  • As with all boarding, vertical joints should be staggered by at least 1 stud to avoid cracking.
  • Once the EBB Clay boards are installed they can be plastered with either lime based plasters (use stainless steel fixings) or clay based plasters (normal drywall screws are fine for this).
  • The joints should be reinforced with 100mm wide reinforcing, bedded in the plaster, although fully meshing the base coat works best.

How much will you need?

  • The EBB Clay boards are 1250 x 625mm and 22mm thick, they cover an area of 0.78 m² per board. Allow at least 5% for wastage.

Are they heavy?

  • The boards themselves weigh around 23kg each so need careful handling and for ceiling applications should be installed with a plasterboard lift.

What is their thermal conductivity?

  • The clay boards are not designed to be a thermal insulator but their thermal conductivity is around 0.47 W/mK, similar to many lime or clay plasters.

Material in action.

Here you can see the Lars applying the length of bead to the corner. A layer of the render is applied first into which the bead can be bedded, straightened and then left to set before the render is applied to the main facade.

Prices & Shipping

Here you will find pricing and shipping estimates. To get a fixed quote, please call our technical team on 01392 861763 or get in touch via the form below.

The pricing of the UdiREINFORCEMENT Corner protection profiles are as follows. Prices do not include VAT or carriage:-

Length of profile [m] Single piece cost Piece cost in packs of 25
2.5 £3.68 £3.31

Carriage is typically calculated at £25 + VAT per box and all orders will be sent in a box. This price does vary if delivery is required to remote locations. If you require only a few beads we may be able to get slightly cheaper shipping so please contact us for a more accurate price.

If this purchase is part of a larger order, please do not use these transport costs as the goods will grouped together for a much more competitive rate.

Request an estimate.

In summary, if you are looking for more than just a builders’ merchant, we might be the guys to talk to.

Request an estimate.

In summary, if you are looking for more than just a builders’ merchant, we might be the guys to talk to.

CPD Training

We offer CPD training for architects practices across Devon and Cornwall.

Software Modelling

We offer CPD training for architects practices across Devon and Cornwall.

Building Plan Review

We offer CPD training for architects practices across Devon and Cornwall.

Overview

Back to Earth is a natural building material supplier. We're not your typical builders'​ merchant though and instead work closely with our clients during the planning, designing and building phases of projects.

Legal

Terms and conditions
Privacy & cookies policy
Data protection policy
Delivery information
Returns and exchanges

© 2018 Back to Earth

© 2018 Back to Earth