To discuss your project give us a call on 01392 861763 or send us a message here.

Double sided mounting tape – Ampacoll DT – 20mm x 50m

Ampacoll DT double sided mounting tape is:-

  • a double sided, acrylic adhesive tape which allows rapid installation of membranes without staples or nails.
  • suitable for internal use on timber studs, all types of timber boards and on wood fibre insulation boards.
  • highly adhesive and suitable for bonding all types of membranes.
  • suitable for winter application down to -5 degrees C.

Prices: from £15.59 + VAT per roll 

Double sided mounting tape – Ampacoll DT – 20mm x 50m

Ampacoll DT double sided mounting tape is:-

  • a double sided, acrylic adhesive tape which allows rapid installation of membranes without staples or nails.
  • suitable for internal use on timber studs, all types of timber boards and on wood fibre insulation boards.
  • highly adhesive and suitable for bonding all types of membranes.
  • suitable for winter application down to -5 degrees C.

Prices: from £15.59 + VAT per roll 

“A really useful tape when you’re trying to install a membrane on the underside of a roof by holding the membrane in place until you can fix your counter-battens” – Chris Brookman

Product overview.

Where is it used?

  • Ampacoll DT double sided mounting tape is used internally to allow the temporary mounting of membranes to surfaces, prior to fixing with counter battens or overboarding. 
  • It can be used to mount membranes directly on to all types of timber rafters or studs, timber boards such OSB, ply, MDF and wood fibre boards with the use of primer.

How is it used?

  • Surfaces should be clean, dry and free of dust before the tape is applied. 
  • The tape is applied straight off of the roll to the surface of the timber or board. 
  • For walls, in conditions without wind, the tape can be used at 800 – 1600mm centres but this should be reduced if the site is windy.
  • For the underside of roofs use at 400 – 800mm centres.
  • If you are taping to wood fibre boards the Ampacoll Primax Primer should be applied and left to dry first. This ensures that the tape will stick properly to these surfaces.
  • Once the membrane is in place and the joints are taped, counter battens should be applied to fix the membrane in place. This should be done within 12 hours of initial mounting.
  • Ampacoll DT double sided tape is not suitable for holding membranes in place whilst loose fill insulation is blown in. Appropriate counter battening must be installed.
Technical Details

How much will I need?

  • Each roll of Ampacoll DT tape is 20mm wide and 50m long. 
  • Allow 0.6-1.2m of tape per m2 of wall or 1.25 – 2.5m per m2 of roof, depending on conditions.

Will it stick in wet conditions?

  • No, the surfaces must be clean and dry. If they are dirty, use the Ampacoll Primax Primer.

Can I use this tape in winter?

  • Yes, you can use it in temperatures all the way down to minus 5 degrees celsius.

Product overview.

Where is it used?

  • Ampacoll DT double sided mounting tape is used internally to allow the temporary mounting of membranes to surfaces, prior to fixing with counter battens or overboarding. 
  • It can be used to mount membranes directly on to all types of timber rafters or studs, timber boards such OSB, ply, MDF and wood fibre boards with the use of primer.

How is it used?

  • Surfaces should be clean, dry and free of dust before the tape is applied. 
  • The tape is applied straight off of the roll to the surface of the timber or board. 
  • For walls, in conditions without wind, the tape can be used at 800 – 1600mm centres but this should be reduced if the site is windy.
  • For the underside of roofs use at 400 – 800mm centres.
  • If you are taping to wood fibre boards the Ampacoll Primax Primer should be applied and left to dry first. This ensures that the tape will stick properly to these surfaces.
  • Once the membrane is in place and the joints are taped, counter battens should be applied to fix the membrane in place. This should be done within 12 hours of initial mounting.
  • Ampacoll DT double sided tape is not suitable for holding membranes in place whilst loose fill insulation is blown in. Appropriate counter battening must be installed.

How much will I need?

  • Each roll of Ampacoll DT tape is 20mm wide and 50m long. 
  • Allow 0.6-1.2m of tape per m2 of wall or 1.25 – 2.5m per m2 of roof, depending on conditions.

Will it stick in wet conditions?

  • No, the surfaces must be clean and dry. If they are dirty, use the Ampacoll Primax Primer.

Can I use this tape in winter?

  • Yes, you can use it in temperatures all the way down to minus 5 degrees celsius.

Material in action.

This shows a piece of membrane being bonded to a metal stud using the Ampacoll DT double sided airtightness tape. It holds it in place whilst you get the next piece ready and in place, making it so much easier to tape the membrane with the final airtightness tapes.

It is super simple but incredibly useful!

 

Prices & Shipping

Here you will find pricing and shipping estimates. To get a fixed quote, please call our technical team on 01392 861763 or get in touch via the form below.

 

Ampacoll DT double sided mounting tapes are priced as below. Rolls can be purchased individually or by the box of 12 rolls with a 10% discount.

Thinkness [mm] Roll width [mm] Roll length [m] Number of rolls per box Amount of tape per box [m] Type of backing Single roll cost box cost
0.5mm 20mm 50 12 600 single solid £15.59 £168.36

Carriage is typically calculated at £15 + VAT per roll or per box. This price does vary if delivery is required to remote locations. If you require only a single roll we may be able to get slightly cheaper shipping so please contact us for a more accurate price.

Request an estimate.

In summary, if you are looking for more than just a builders’ merchant, we might be the guys to talk to.

Request an estimate.

In summary, if you are looking for more than just a builders’ merchant, we might be the guys to talk to.

Customers also bought…

No Results Found

The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.

CPD Training

We offer CPD training for architects practices across Devon and Cornwall.

Software Modelling

We offer CPD training for architects practices across Devon and Cornwall.

Building Plan Review

We offer CPD training for architects practices across Devon and Cornwall.

Overview

Back to Earth is a natural building material supplier. We're not your typical builders'​ merchant though and instead work closely with our clients during the planning, designing and building phases of projects.

Legal

Terms and conditions
Privacy & cookies policy
Data protection policy
Delivery information
Returns and exchanges

© 2018 Back to Earth

© 2018 Back to Earth

0/5 (0 Reviews)