To discuss your project give us a call on 01392 861763 or send us a message here.

Extremely fine lime finishing plaster – Baumit Klima Glatte

Baumit Klima Glatte is:-

  • a beautiful natural white, lime based fine finishing plaster.
  • great for finishing walls and ceilings to create a very fine finish
  • used as a finishing plaster over Baumit RK38 or Baumit RK70.
  • used over lime and cement plasters, no fines concrete and renovating plasters.

Prices: from £13.96 + VAT per bag

Extremely fine lime finishing plaster – Baumit Klima Glatte

Baumit Klima Glatte is:-

  • a beautiful natural white, lime based fine finishing plaster.
  • great for finishing walls and ceilings to create a very fine finish
  • used as a finishing plaster over Baumit RK38 or Baumit RK70.
  • used over lime and cement plasters, no fines concrete and renovating plasters.

Prices: from £13.96 + VAT per bag

“A lovely creamy lime finishing plaster that you can finish as fine as gypsum. Perfect for modern, breathable finishes.” – Chris Brookman

 

Product overview.

Where is it used?

  • Baumit Klima Glatte is suitable for use in all internal areas, walls and ceilings and capable of achieving a very fine finish. 
  • It can be used in areas of high humidity due to it’s very breathable nature but not in designated wet rooms. 
  • It should also not be used to finish gypsum boards or over gypsum plasters.

How is it used?

  • Baumit Klima Glatte is mixed by adding to clean water and leaving to sit for 5-10 minutes after which point it can be whisked in to a smooth, creamy, lump-free consistency. 
  • This is applied to the surface with a steel trowel at 1-2mm thickness and then left to stiffen for around 2 hours (may be longer in cooler, more humid conditions). 
  • A second, thinner and wetter layer is then applied and used to finish the plaster, bringing the total thickness to around 2mm.
Technical Details

How much will you need?

Baumit Klima Glatt has a density of 1.3kg per mm per m² (1mm thickness of plaster over 1m²). Each 20kg bag will cover up to 8m² at 2mm thickness.

How long does it take to set?

Setting times vary with temperature and humidity but in the summer the product will usually stiffen enough to finish in a few hours and set hard within 24 hours, depending on the thickness of the applied coat. In winter or cooler temperatures stiffening may be extended to more than one day with hardening more than two days.

Product overview.

Where are they used?

  • As a walling or ceiling board.
  • Between bedrooms and bathrooms
  • Bathroom and kitchen ceilings
  • Stud partitions

How are they used?

  • EBB Clay boards should be fixed using either drywall screws or stainless screws (depending on plaster to be applied) to a timber frame at a maximum of 625mm centres for walling and 417mm centres for ceiling applications.
  • 36mm plastic or stainless steel washers should also be used for ceiling applications.
  • As with all boarding, vertical joints should be staggered by at least 1 stud to avoid cracking.
  • Once the EBB Clay boards are installed they can be plastered with either lime based plasters (use stainless steel fixings) or clay based plasters (normal drywall screws are fine for this).
  • The joints should be reinforced with 100mm wide reinforcing, bedded in the plaster, although fully meshing the base coat works best.

How much will you need?

  • The EBB Clay boards are 1250 x 625mm and 22mm thick, they cover an area of 0.78 m² per board. Allow at least 5% for wastage.

Are they heavy?

  • The boards themselves weigh around 23kg each so need careful handling and for ceiling applications should be installed with a plasterboard lift.

What is their thermal conductivity?

  • The clay boards are not designed to be a thermal insulator but their thermal conductivity is around 0.47 W/mK, similar to many lime or clay plasters.

Material in action.

Here you can see the finishing touches being applied to the surface of walls insulated with the UdiRECO system. The Baumit Klima Glatt was applied as the finish and trowelled to a very high quality finish.

Prices & Shipping

Here you will find pricing and shipping estimates. To get a fixed quote, please call our technical team on 01392 861763 or get in touch via the form below.

Baumit Klima Glatt costs £13.96 + VAT per 20kg bag with a 5% discount on full pallets of 48 bags.

Carriage is typically calculated at £65 + VAT per pallet and all orders of more than one bag will be sent on a pallet. This price does vary if delivery is required to remote locations. If you require only a few bags we may be able to get slightly cheaper shipping so please contact us for a more accurate price.

 

Request an estimate.

In summary, if you are looking for more than just a builders’ merchant, we might be the guys to talk to.

Request an estimate.

In summary, if you are looking for more than just a builders’ merchant, we might be the guys to talk to.

CPD Training

We offer CPD training for architects practices across Devon and Cornwall.

Software Modelling

We offer CPD training for architects practices across Devon and Cornwall.

Building Plan Review

We offer CPD training for architects practices across Devon and Cornwall.

Overview

Back to Earth is a natural building material supplier. We're not your typical builders'​ merchant though and instead work closely with our clients during the planning, designing and building phases of projects.

Legal

Terms and conditions
Privacy & cookies policy
Data protection policy
Delivery information
Returns and exchanges

© 2018 Back to Earth

© 2018 Back to Earth

0/5 (0 Reviews)