To discuss your project give us a call on 01392 861763 or send us a message here.

Lime basecoat render for wood fibre insulation – UdiFOUNDATION COAT

UdiFOUNDATION COAT render is:-

  • a robust external base coat plaster for all Udi wood fibre insulation systems.
  • an excellent lime based bonding coat plaster.
  • a reinforcing coat with fibreglass mesh.
  • fine enough to be used as an internal finish, for a robust, slightly grainy, natural white finish.

Prices: from £27.14 + VAT per bag

Lime basecoat render for wood fibre insulation – UdiFOUNDATION COAT

UdiFOUNDATION COAT render is:-

  • a robust external base coat plaster for all Udi wood fibre insulation systems.
  • an excellent lime based bonding coat plaster.
  • a reinforcing coat with fibreglass mesh.
  • fine enough to be used as an internal finish, for a robust, slightly grainy, natural white finish.

See below for pricing.

“Superb product. Really helped us resolve issues we were having with mould on a number of our projects”

Adam Milton, Founding Director at Carpenter Oak.

Product overview.

Where is it used?

  • UdiFOUNDATION COAT lime render can be used on all wood fibre and wood wool substrates and is used in conjunction with UdiREINFORCEMENT mesh to provide a robust reinforced plaster layer.
  • It can also be used on concrete, masonry, render carrier boards, lime and lime/cement plasters so long as they are sound and able to take another plaster layer.

How is it used?

  • UdiFOUNDATION COAT render is best mixed with clean tap water, using a plaster whisk, to achieve a smooth lump free consistency.
  • It’s ‘sticky’ nature means it is very easy to apply to a whole range of backgrounds.
  • Surfaces should be clean and dry with air and surface temperatures above 8 deg C.
  • It should be applied with a clean steel trowel and the whole surface ‘combed’ with a 20mm round knotched trowel whilst it is still wet, aiming for a minimum 5mm layer.
  • UdiREINFORCEMENT mesh should then be trowelled in to the surface (overlapping each piece by 100mm) and covered by the UdiFOUNDATION COAT render so that it is no longer visible.
  • Allow a drying period of 1mm per day before applying subsequent finishes and use scaffolding nets and occasional moistening to prevent drying too quickly.
Technical Details

How much will you need?

  • UdiFOUNDATION COAT lime render has a density of 1.5kg per mm per m² (1mm thickness of plaster over 1m²). Each 25kg bag will cover up to 4m² at 5mm thickness.
  • It should only be used when temperatures are above 8 degrees Celsius and away from strong, drying winds and direct sunlight. This product will cure at a rate of 1mm per day in optimum conditions.

How long does it take to set?

  • Setting times vary with temperature and humidity but in the summer the product will usually stiffen enough to finish in a few hours and set hard overnight. In winter stiffening may be extended to more than one day with hardening more than two days.

Product overview.

Where is it used?

  • UdiFOUNDATION COAT lime render can be used on all wood fibre and wood wool substrates and is used in conjunction with UdiREINFORCEMENT mesh to provide a robust reinforced plaster layer.
  • It can also be used on concrete, masonry, render carrier boards, lime and lime/cement plasters so long as they are sound and able to take another plaster layer.

How is it used?

  • UdiFOUNDATION COAT render is best mixed with clean tap water, using a plaster whisk, to achieve a smooth lump free consistency.
  • It’s ‘sticky’ nature means it is very easy to apply to a whole range of backgrounds.
  • Surfaces should be clean and dry with air and surface temperatures above 8 deg C.
  • It should be applied with a clean steel trowel and the whole surface ‘combed’ with a 20mm round knotched trowel whilst it is still wet, aiming for a minimum 5mm layer.
  • UdiREINFORCEMENT mesh should then be trowelled in to the surface (overlapping each piece by 100mm) and covered by the UdiFOUNDATION COAT render so that it is no longer visible.
  • Allow a drying period of 1mm per day before applying subsequent finishes and use scaffolding nets and occasional moistening to prevent drying too quickly.

How much will you need?

  • UdiFOUNDATION COAT lime render has a density of 1.5kg per mm per m² (1mm thickness of plaster over 1m²). Each 25kg bag will cover up to 4m² at 5mm thickness.
  • It should only be used when temperatures are above 8 degrees Celsius and away from strong, drying winds and direct sunlight. This product will cure at a rate of 1mm per day in optimum conditions.

How long does it take to set?

  • Setting times vary with temperature and humidity but in the summer the product will usually stiffen enough to finish in a few hours and set hard overnight. In winter stiffening may be extended to more than one day with hardening more than two days.

Material in action.

The UdiFOUNDATION COAT plaster is a lovely, creamy plaster that is really easy to use. This video gives some basic guidance for those who have not used thin layer plasters before and goes through application starting from plinth level upwards.

Prices & Shipping

Here you will find pricing and shipping estimates. To get a fixed quote, please call our technical team on 01392 861763 or get in touch via the form below.

 

UdiFOUNDATION COAT lime render for wood fibre insulation costs £27.14 + VAT per 25kg bag with a 10% discount on full pallets of 42 bags.

Carriage is typically calculated at £65 + VAT per pallet and all orders of more than one bag will be sent on a pallet. This price does vary if delivery is required to remote locations. If you require only a few bags we may be able to get slightly cheaper shipping so please contact us for a more accurate price.

 

Request an estimate.

In summary, if you are looking for more than just a builders’ merchant, we might be the guys to talk to.

Request an estimate.

In summary, if you are looking for more than just a builders’ merchant, we might be the guys to talk to.

Customers also bought…

No Results Found

The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.

CPD Training

We offer CPD training for architects practices across Devon and Cornwall.

Software Modelling

We offer CPD training for architects practices across Devon and Cornwall.

Building Plan Review

We offer CPD training for architects practices across Devon and Cornwall.

Overview

Back to Earth is a natural building material supplier. We're not your typical builders'​ merchant though and instead work closely with our clients during the planning, designing and building phases of projects.

Legal

Terms and conditions
Privacy & cookies policy
Data protection policy
Delivery information
Returns and exchanges

© 2018 Back to Earth

© 2018 Back to Earth

0/5 (0 Reviews)