To discuss your project give us a call on 01392 861763 or send us a message here.

UV resistant facade membrane – Ampatop F Black

Ampatop F Black UV resistant facade membrane is:-

  • a black monolithic, TPU membrane for use behind cladding with gaps between panel or strips.
  • UV resistant to over 10 years sunlight penetrating through the gaps.
  • suitable for use with gaps up to 50mm wide and open areas up to 40% of the total facade area.
  • a thick but breathable membrane, suitable for use over our wood fibre insulation systems.

Prices: from £236.29 + VAT per 50 x 1.5m roll

UV resistant facade membrane – Ampatop F Black

Ampatop F Black UV resistant facade membrane is:-

  • a black monolithic, TPU membrane for use behind cladding with gaps between panel or strips.
  • UV resistant to over 10 years sunlight penetrating through the gaps.
  • suitable for use with gaps up to 50mm wide and open areas up to 40% of the total facade area.
  • a thick but breathable membrane, suitable for use over our wood fibre insulation systems.

Prices: from £236.29 + VAT per 50 x 1.5m roll

Close-ups.

Take a closer look at this product with these additional images.

Image description: This shows a close up of the surface of the membrane behind some wooden cladding. The tape you can see here is the Ampacoll F Colour transparent UV resistant tape.

Image description: This is a close-up of the corner of a window opening where the Ampatop F Black has been turned in around the reveal. This reveal is taped with Ampacoll UV, a completely black, unbranded tape so no writing is visible between the gaps in the facade.

“A really heavy duty, robust membrane for ensuring breathability of facades, with the concern of UV damage to the fabric beneath” – Chris Brookman

 

Product overview.

Where is it used?

  • Ampatop F Black can be used on all vertical facades where no more than 40% of the surface between cladding strips or modules is open.

How much will I need?

  • Each roll of Ampatop F Black is 50 x 1.5m, or 75m² per roll.
  • Overlaps of 150mm are recommended which reduces the coverage of a roll to 67.5m²

Can I use it on a roof?

  • Ampatop F Black is not suitable for use on roofs with gaps between roof covering materials.
  • For roofs down to a pitch of 5° use Ampatop Seal. This product is not designed to resist UV for more than 3 months though so make sure no sunlight will reach the membrane.

How is it used?

  • Ampatop® F black (plus) should be laid onto the existing support structure, taut and without any folds, with the black side out- wards.
  • It should be fastened with staples that must be invisible in the overlap area. It is advantageous to cover them with battens.
  • Both the vertical and the horizontal overlaps should be 15cm wide and taped down with the integrated tape or Ampacoll® UV, so that it is windproof.
  • Next the counter battens are laid, thus finally fixing the wind proofing to the support structure.
  • Visible staples that are exposed to the weather could lead to leaks, and as such should be avoided.
  • We recommend fixings that are galvanised as a minimum, with stainless steel being preferable.
  • The counter battens are required to secure further work and prevent any possible weather effects (e. g. wind suction or pressure).
  • Penetrations and connections should be bonded to make them windproof with Ampacoll® UV or Ampa- coll® Superfix.
  • The connection width should, where possible, be at least 10 cm. If this is not possible, a mechanical fixing is advisable.
  • In the case of windows and external doors,Ampatop® F black should be made windproof with Ampacoll® UV or Ampacoll® Superfix on the frame and if necessary secured mechanically.
  • We recommend that the façade cladding is installed as soon as possible. In any event, the cladding must be mounted within three months.
  • The joint width may be up to 50 mm. The individual façade elements must be at least twice as wide.
  • The percentage of openings must not exceed 40 %.

Product overview.

Where is it used?

  • Ampatop F Black can be used on all vertical facades where no more than 40% of the surface between cladding strips or modules is open.

How is it used?

  • Ampatop® F black (plus) should be laid onto the existing support structure, taut and without any folds, with the black side out- wards.
  • It should be fastened with staples that must be invisible in the overlap area. It is advantageous to cover them with battens.
  • Both the vertical and the horizontal overlaps should be 15cm wide and taped down with the integrated tape or Ampacoll® UV, so that it is windproof.
  • Next the counter battens are laid, thus finally fixing the wind proofing to the support structure.
  • Visible staples that are exposed to the weather could lead to leaks, and as such should be avoided.
  • We recommend fixings that are galvanised as a minimum, with stainless steel being preferable.
  • The counter battens are required to secure further work and prevent any possible weather effects (e. g. wind suction or pressure).
  • Penetrations and connections should be bonded to make them windproof with Ampacoll® UV or Ampa- coll® Superfix.
  • The connection width should, where possible, be at least 10 cm. If this is not possible, a mechanical fixing is advisable.
  • In the case of windows and external doors,Ampatop® F black should be made windproof with Ampacoll® UV or Ampacoll® Superfix on the frame and if necessary secured mechanically.
  • We recommend that the façade cladding is installed as soon as possible. In any event, the cladding must be mounted within three months.
  • The joint width may be up to 50 mm. The individual façade elements must be at least twice as wide.
  • The percentage of openings must not exceed 40 %.

How much will I need?

  • Each roll of Ampatop F Black is 50 x 1.5m, or 75m² per roll.
  • Overlaps of 150mm are recommended which reduces the coverage of a roll to 67.5m²

Can I use it on a roof?

  • Ampatop F Black is not suitable for use on roofs with gaps between roof covering materials.
  • For roofs down to a pitch of 5° use Ampatop Seal. This product is not designed to resist UV for more than 3 months though so make sure no sunlight will reach the membrane.

Material in action.

Here you can see the a facade with the Ampatop F Black applied to the outer surface and then black timber battens applied over this, ready to receive the final cladding materials.

Prices & Shipping

Here you will find pricing and shipping estimates. To get a fixed quote, please call our technical team on 01392 861763 or get in touch via the form below.

Ampatop F Black membrane is priced as below with a 10% discount on orders of 5 rolls or more.

Roll length [m] Roll width [m] Roll Area [m²] Membrane weight [g/m²] Roll weight [kg] Sd value [m] Single roll cost [£] 5+ rolls [each]
50 1.5 75 220 16.5 0.09 £236.29 £212.66

Carriage is typically calculated at £15 + VAT per roll. This price does vary if delivery is required to remote locations so please contact us for a more accurate price.

Request an estimate.

In summary, if you are looking for more than just a builders’ merchant, we might be the guys to talk to.

Request an estimate.

In summary, if you are looking for more than just a builders’ merchant, we might be the guys to talk to.

CPD Training

We offer CPD training for architects practices across Devon and Cornwall.

Software Modelling

We offer CPD training for architects practices across Devon and Cornwall.

Building Plan Review

We offer CPD training for architects practices across Devon and Cornwall.

Overview

Back to Earth is a natural building material supplier. We're not your typical builders'​ merchant though and instead work closely with our clients during the planning, designing and building phases of projects.

Legal

Terms and conditions
Privacy & cookies policy
Data protection policy
Delivery information
Returns and exchanges

© 2018 Back to Earth

© 2018 Back to Earth