To discuss your project give us a call on 01392 861763

Sustainable Building Forum

The place to share best practice advice about all things sustainable building. Use the search icon to find the topic you’re interested in or register as a member to comment on topics and ask your own questions.

Clear all

lithotherm UFH system manifold

2 Posts
2 Users
Posts: 2
Topic starter

Hi I am installing the lithotherm UFH system . Is there a preferred manifold that takes the 14mm lithotherm pipe . Standard sizes are 10 or 15mm . I do have the manifold connectors supplied with the pipe , just not sure what thread type or size they are? These will obviously need to attach to the manifold. 

Thanks in advance


Posted : 02/11/2023 1:55 pm
Posts: 80
Member Admin

Hi Hamilton. The Eurocone connectors that come with the 14mm pipe connect to a 3/4 inch manifold which is 19mm. This is a standard size for manifolds using 15/16mm pipe so just purchase these standard manifolds and the pipes will connect correctly.

You can see an example here -

Hope that helps.

Posted : 02/11/2023 3:25 pm

CPD Training

We offer CPD training for architects practices across Devon and Cornwall.

Software Modelling

We offer dynamic heat and moisture modelling as well as condensation risk analyses.

Building Plan Review

If you have some plans and would like our opinion on which materials would be the best for you, contact us.


Back to Earth is a natural building material supplier. We're not your typical builders'​ merchant though and instead work closely with our clients during the planning, designing and building phases of projects.

Back to Earth is a proud signatory of the Anti-Greenwash Charter:

© 2023 Back to Earth