To discuss your project give us a call on 01392 861763 or send us a message here

Fine renovating render and plaster – Baumit SP 64 F

Baumit SP64 F render is:-

  • a hydrophobic, fine grained, renovating render for salt contaminated masonry.
  • highly vapour permeable and allows damp masonry to dry.
  • a lime based render, suitable for all types of solid masonry, historic or modern.
  • suitable as a base coat over smooth surfaces or a fine grained top coat.

Prices: from £17.55 + VAT per bag 

Fine renovating render and plaster – Baumit SP 64 F

Baumit SP64 F render is:-

  • a hydrophobic, fine grained, renovating render for salt contaminated masonry.
  • highly vapour permeable and allows damp masonry to dry.
  • a lime based render, suitable for all types of solid masonry, historic or modern.
  • suitable as a base coat over smooth surfaces or a fine grained top coat.

Prices: from £17.55 + VAT per bag

“A really useful salt retaining renovating plaster, ideal for high quality refurbishment work”

Product overview.

Where is it used?

  • Internally and externally, including splash zones and wet rooms.
  • Baumit SP64 F lime render can be applied on to all types of dense masonry such as natural stone, brick, concrete block and cast concrete. 
  • It can be used as a base coat and a plain finish coat which can then receive decoration with a range of Baumit paints internally or Baumit decorative finish renders externally.

How is it used?

  • Baumit SP64 F is designed for machine application and hand application.
  • When hand mixing it should be mixed with clean tap water (6-7 litres per bag) using an electric whisk to a smooth creamy consistency and applied by hand with a steel trowel. 
  • Each backing coat must be a minimum of 10mm.
  • It should be applied at a minimum of 20mm ( 2 x 10mm coats) for sulphate and chloride contamination or 30mm (2 x 15mm coats) for nitrate contamination. 
  • Baumit StarTex mesh should be incorporated into the outer third of the base coat if the substrate is damp or made of dissimilar materials. 
  • The base coat should be finished with a plasterers comb or stiff brush to create a suitable key for decorative topcoat renders. 
  • When used as a finish coat it can be sponge finished and painted.
  • See data sheet for full instructions.
Technical Details

How much will you need?

Baumit SP64 F has a density of 1.4kg per mm per m² (1mm thickness of plaster over 1m²). Each 35kg bag of Baumit SP64 F will cover up to 1.9m² at 15mm thickness.

How long does it take to set?

Setting times vary with temperature and humidity but in the summer the product will usually stiffen enough to finish in a few hours and set hard overnight. In winter stiffening may be extended to more than one day with hardening more than two days.

Product overview.

Where is it used?

  • Internally and externally, including splash zones and wet rooms.
  • Baumit SP64 F lime render can be applied on to all types of dense masonry such as natural stone, brick, concrete block and cast concrete. 
  • It can be used as a base coat and a plain finish coat which can then receive decoration with a range of Baumit paints internally or Baumit decorative finish renders externally.

How is it used?

  • Baumit SP64 F is designed for machine application and hand application.
  • When hand mixing it should be mixed with clean tap water (6-7 litres per bag) using an electric whisk to a smooth creamy consistency and applied by hand with a steel trowel. 
  • Each backing coat must be a minimum of 10mm.
  • It should be applied at a minimum of 20mm ( 2 x 10mm coats) for sulphate and chloride contamination or 30mm (2 x 15mm coats) for nitrate contamination. 
  • Baumit StarTex mesh should be incorporated into the outer third of the base coat if the substrate is damp or made of dissimilar materials. 
  • The base coat should be finished with a plasterers comb or stiff brush to create a suitable key for decorative topcoat renders. 
  • When used as a finish coat it can be sponge finished and painted.
  • See data sheet for full instructions.

How much will you need?

  • Baumit SP64 F has a density of 1.4kg per mm per m² (1mm thickness of plaster over 1m²). Each 35kg bag of Baumit SP64 F will cover up to 1.9m² at 15mm thickness.

How long does it take to set?

  • Setting times vary with temperature and humidity but in the summer the product will usually stiffen enough to finish in a few hours and set hard overnight. In winter stiffening may be extended to more than one day with hardening more than two days.

Material in action.

The Baumit SP64 F works as both a base coat and top coat plaster which can be used internally and externally. Here the build-up shown is for an external situation where a brick wall has been re-rendered. The system is then finished with a silicate finish render such as Baumit SilikatTop or Baumit NanoporTop.

Prices & Shipping

Here you will find pricing and shipping estimates. To get a fixed quote, please call our technical team on 01392 861763 or get in touch via the form below.

 

Baumit SP 64 F costs £17.55 + VAT per 35kg bag with a 5% discount on full pallets of 28 bags.

Carriage is typically calculated at £65 + VAT per pallet and all orders will be sent on a pallet. This price does vary if delivery is required to remote locations. If you require only a few bags we may be able to get slightly cheaper shipping so please contact us for a more accurate price.

 

Request an estimate.

In summary, if you are looking for more than just a builders’ merchant, we might be the guys to talk to.

Request an estimate.

In summary, if you are looking for more than just a builders’ merchant, we might be the guys to talk to.

Customers also bought…

No Results Found

The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.

CPD Training

We offer CPD training for architects practices across Devon and Cornwall.

Software Modelling

We offer CPD training for architects practices across Devon and Cornwall.

Building Plan Review

We offer CPD training for architects practices across Devon and Cornwall.

Overview

Back to Earth is a natural building material supplier. We're not your typical builders'​ merchant though and instead work closely with our clients during the planning, designing and building phases of projects.

Legal

Terms and conditions
Privacy & cookies policy
Data protection policy
Delivery information
Returns and exchanges

© 2018 Back to Earth

© 2018 Back to Earth