SPECIFICATION GENERATOR
Find out which low impact materials are right for your building project.

SEARCH PRODUCTS
CONTACT US

From £9.82 + VAT per tube

Wood fibre board glue – UdiSPECIAL ADHESIVE

UdiSPECIAL ADHESIVE is:-

  • a water based, incredibly strong, acrylate glue for glueing all wood fibre boards.
  • ideal for glueing all wood fibre boards where cut joints or corners have been formed.
  • used for glueing wood fibre boards to polystyrene plinth insulation.

Gallery
UdiSPEZIALKLEBER_clipped_rev_1 Material in action. Here you can see the EBB clay boards being attached to a new ceiling within a large building restoration project in Somerset. The boards are being used primarily because of their acoustic absorption so that privacy and acoustic separation are maintained in each of the rooms. In spite of some initial reservations, the installers find them simple and easy to work with and there is little waste. Once all of the boards have been installed they will be plastered with the Baumit RK 38 and finished with the Baumit Klima Glatte for a slightly textured, historic feel. This shows the UdiSPECIAL ADHESIVE in tubes. These are typically enough for half of one 1300 x 800mm reveal board or 2m of 150mm wide window reveal.

Book your free project consultation

View technical details

Create your own specification

Product overview

Where is it used?

  • UdiSPECIAL ADHESIVE is used in plinth areas and around window and door reveals to glue wood fibre boards.
  • It can also be used to glue wood fibre boards which have been cut and have one square edge, reducing wastage.

How is it used?

  • Surfaces should be clean, dry and free of loose material before the UdiSPECIAL ADHESIVE is applied.
  • Apply generously to both surfaces and remove excess once in place.
  • Drying times are affected by temperature and humidity so in cold weather they will be longer.
  • Keep the lid on the tub at all times and replace immediately after use.
  • Keep the edges of the tub clean as this allows correct sealing of the lid.
  • Wash tools immediately after use as once dried the UdiSPECIAL ADHESIVE is very difficult to remove from pretty much everything!!

How much will you need?

  • Use approximately 2 kg / m2 on to a weakly absorbent substrate such as wood fibre, minimum layer thickness: 2 mm.
  • Based on the 12kg tubs, each tub should cover around 6m2 for wood fibre substrates.

Frequently asked questions

How long does it take to dry?

  • The glue gets a skin on it very quickly in dry, warm weather and so tools should be kept clean and the lid kept on the bucket. Full drying is achieve in around 1.5 hours but this will be extended into winter.
  • The glue should only be used above 5C and below 30C.

Technical details

Product downloads

Product Data Sheet UdiSPECIAL ADHESIVE

Pricing & shipping

This product comes in a small box and so will be sent by courier, costing around £13 + VAT.

 ContainerWeight of contents [kg] CoverageCost
tub126m² @ 2mm£90.26
tube0.90.3m² @ 2mm£12.36

Book your free project consultation

We’d like to hear from you. Call us on 01392 861763 or email us at chris@backtoearth.co.uk with any questions or comments.

If you can’t seem to find what you need on our website or you have large quantities of materials to purchase please contact us for a chat and we’ll offer you a more bespoke solution.

We’re normally open from 8.30 am to 5 pm Monday to Thursday, and 8.30 am to 1pm on Friday.

Name
Postcode