SPECIFICATION GENERATOR
Find out which low impact materials are right for your building project.
To discuss your project give us a call on 01392 861763
From £16.28 + VAT per bag
Lightweight lime render and plaster – Baumit MP 69
Baumit MP69 lightweight render is:-
- a light weight, pale grey, vapour permeable (breathable), lime based render
- an excellent base coat render for dense masonry, lightweight block and Porotherm.
- great for use under Baumit decorative topcoats.
- also suitable as a top coat render for interior and exterior.
Product overview
Where is it used?
- Baumit MP69 is used internally and externally as a base coat on to light weight backgrounds (λ ≥ 0.11 W/mK) such as light weight block or Porotherm block.
- It can also be used as a base coat on to normal dense masonry and can be reinforced with a layer of MC55 and StarTex mesh.
How is it used?
- Baumit MP69 should be mixed by a plaster whisk with clean tap water to a smooth consistency and then applied by hand or it can be spray applied by machine.
- Externally it needs to be applied at a minimum thickness of 18mm in one pass and at a maximum of 20mm per coat.
- It can also be used internally where it is applied at a typical thickness of 10mm.
- Baumit MP69 can then be applied as a top coat at 3mm if required or other finishes from the Baumit range can be applied.
How much will you need?
Baumit MP 69 has a density of 1.0kg per mm per m² (1mm thickness of plaster over 1m²). Each 30kg bag of Baumit MP 69 will cover up to 1.5m² at 18mm thickness or 3.2m² at 10mm thickness.
Frequently asked questions
How long does it take to set?
How long does it take to set?
How long does it take to set?
How long does it take to set?
How long does it take to set?
How long does it take to set?
Setting times vary with temperature and humidity but in the summer the product will usually stiffen enough to finish in a few hours and set hard overnight. In winter stiffening may be extended to more than one day with hardening more than two days.
Technical details
Product downloads
Pricing & shipping
This product will require one pallet space and so shipping is likely to cost between £50 and £100, depending on where you live. Contact Us for a more accurate costing.
| Bag weight (kg) | Coverage [m²] | Single bag cost | Full pallet bag cost |
|---|---|---|---|
| 30 | 1.6m2 @ 18mm | £17.97 | £16.17 |
Book your free project consultation
We’d like to hear from you. Call us on 01392 861763 or email us at chris@backtoearth.co.uk with any questions or comments.
If you can’t seem to find what you need on our website or you have large quantities of materials to purchase please contact us for a chat and we’ll offer you a more bespoke solution.
We’re normally open from 8.30 am to 5 pm Monday to Thursday, and 8.30 am to 1pm on Friday.