PRODUCT SEARCH
Find high performance, low impact materials for your building project.
To discuss your project give us a call on 01392 861763
Suspended timber floors are one of the most accessible entry points for improving a home’s energy performance — and one of the most overlooked. Human physiology makes us particularly sensitive to heat loss through our feet, and in many older…
How much internal wall insulation you can safely add is one of the most common questions in retrofit — and one of the most poorly understood. The starting point is wall thickness. A 100mm single-skin brick wall offers very little…
U-value targets for retrofit are often treated as a straightforward regulatory question, but the reality is considerably more nuanced. Building control generally steers projects towards 0.3 W/m²K, with a threshold value of 0.7 — and Part L does allow for…
Continuity of insulation is one of the most important — and most frequently compromised — principles in both retrofit and new build. A common scenario on site is a 170mm joist or rafter cavity filled with 160mm of insulation, with…
Brick creams — siloxane-based water repellent treatments applied to masonry surfaces — are a genuinely useful tool in retrofit, though one that attracts more debate than it perhaps deserves. The controversy is largely historical: earlier formulations tended to block pores…
In this episode, Chris & Andy discuss the importance of considering airtightness when insulating. Insulation and airtightness are two distinct but inseparable parts of a well-performing building fabric, and a common misconception is that one can substitute for the other.…
PIR and wood fibre insulation are both widely used insulation materials, but they differ in almost every meaningful respect beyond their basic function of reducing heat loss. On acoustics, the contrast is stark: PIR is lightweight and rigid, which makes…
Silicone render is a polymer-based finish coat applied over a lime basecoat that combines two properties which are difficult to achieve simultaneously in traditional materials: strong water repellency and good vapour permeability. It keeps liquid water from penetrating the surface…
Wood fibre insulation is a timber-based material and it does burn — that much is straightforward. What’s less well understood is how it burns and what that means in practice. In complete combustion, wood fibre produces very few harmful by-products…
The question of whether an approved installer is necessary is one that comes up regularly, and the honest answer is more nuanced than a simple yes or no. Many manufacturers run their own training schemes and approved installer programmes, but…