SPECIFICATION GENERATOR
Find out which low impact materials are right for your building project.
To discuss your project give us a call on 01392 861763
Your specification
Below you'll find your specification. If you would like to discuss this with us, please give us a call on 01392 861763.
Our suggested specification:-
- Existing cavity wall, plaster removed – WITHOUT CAVITY FILL ONLY
- 5-10mm Baumit Viton Fein clay plaster levelling coat
- 60mm UdiTHERM NF T&G wood fibre board
- Ampatex Variano or Ampatex LDA membranes, depending on which we’ve suggested is best
- 25mm batten, fully filled with SteicoFlex flexible wood fibre insulation
- 12mm plasterboard
- Interior
Please check this spec’s suitability for your project before installation. Simply Contact us with your full construction type and location and we’ll do the rest.
For more information on how to install these materials, please follow our guide here.
(Use the shift button and scroll wheel to manipulate models)
U-Value
0.40 W/m2K