SPECIFICATION GENERATOR
Find out which low impact materials are right for your building project.
To discuss your project give us a call on 01392 861763
Your specification
Below you'll find your specification. If you would like to discuss this with us, please give us a call on 01392 861763.
Our suggested specification:-
- Ground
- Existing below ground masonry walling – regular amounts of water leaking into interior.
- Newtonite Meshed Damp Proofing Membrane, or similar (must have mesh bonded to the surface), mechanically fixed to walls.
- Multipor FIX X710 lightweight adhesive to level, if required
- 5mm Multipor FIX X710 lightweight adhesive, applied to back of boards
- 100mm Multipor mineral insulation boards
- 5mm Multipor FIX X710 lightweight adhesive, incorporating Baumit StarTex mesh
- 2-3mm Baumit RK 70N lime finish plaster
- Interior
For more information on how to insulate your below-ground walls or basement, please see our installation guide here.
In this example, the membrane in the wall allows water to drain into a foamglas insulated basement floor and into a sump, to be subsequently removed.
(Use the shift button and scroll wheel to manipulate models)
U-Value
Approx. 0.23 W/m2K - Contact us for more accurate figures.