SPECIFICATION GENERATOR
Find out which low impact materials are right for your building project.
To discuss your project give us a call on 01392 861763
Your specification
Below you'll find your specification. If you would like to discuss this with us, please give us a call on 01392 861763.
Our suggested specification, based on floors with a P/A ratio of 1.0:-
- Interior
- Floor finish
- 18mm floor boards (or can be covered with stone/ceramic tiles)
- 45mm Lithotherm underfloor heating tiles
- 2 x layers of square edge wood fibre reveal boards
- 30mm Cemwood CW2000 levelling aggregate
- Ampatex Solero vapour control membranes, taped with Ampacoll INT airtightness tape.
- Geotextile membrane
- 150mm FG40 Foamed glass aggregate
- Geotextile membrane
- Ground
To see more on how to install these materials, please see our guide here.
(Use the shift button and scroll wheel to manipulate models)
U-Value
0.25 W/m2K