To discuss your project give us a call on 01392 861763 or send us a message here

Wood fibre insulation boards for uneven walls – UdiRECO

UdiRECO wood fibre Insulation Boards are:-

  • An eco friendly, external and internal insulation for solid walls which aren’t flat.
  • A great product for retrofit/refurbishment, especially at thicknesses over 100mm.
  • Ideal for rough rendered or uneven stone/brick walls
  • Excellent at keeping you warm in the winter and cool in the summer.
  • An insulation that keeps your walls breathable, preventing moisture related issues such as mould. 

Prices: from £31.14 + VAT per board

Wood fibre insulation boards for uneven walls – UdiRECO

UdiRECO wood fibre Insulation Boards are:-

  • An eco friendly, external and internal insulation for solid walls which aren’t flat.
  • A great product for retrofit/refurbishment, especially at thicknesses over 100mm.
  • Ideal for rough rendered or uneven stone/brick walls
  • Excellent at keeping you warm in the winter and cool in the summer.
  • An insulation that keeps your walls breathable, preventing moisture related issues such as mould. 

Prices: from £31.14 + VAT per board

Close-ups.

Take a closer look at this product with these additional images.

Image description: This image shows the UdiRECO boards from the side. You can see the flexible layer on the back which allows it to mould itself to uneven surfaces.

Image description: This shows the surface of the UdiRECO boards with the fixing holes pre-countersunk so that the fixings end up perfectly flush with the surface once installed.

“A quick and simple way to insulate natural stone walls, without losing the character and made all the easier with our fixing template that locates the stones” – Chris Brookman

 

Product overview.

Where is it used?

  • Internally and externally, for new-build and retrofit on to all types of masonry. The board has a unique backing which moulds itself to uneven or rendered surfaces, avoiding the need to render walls flat first.
  • Undersides of very wavy rafters in old houses.

How is it used?

  • In short, by screwing it to the wall and rendering it. Simple. For the full guide please download here or read through the quick summary below.
  • Plan out your wall first. The first course of UdiRECO boards should start at least 300mm above the ground level, above the plinth insulation.
  • Measure the position of window openings so that there are no horizontal or vertical joints within 300mm of the corners of any openings. If this is not possible then the UdiSPECIAL ADHESIVE must be used to glue the joints in these areas.
  • UdiRECO insulation boards should be laid in horizontal rows, with the tongues pointing upward and loosely fixed with 2 UdiASSEMBLY fixings to begin with. Once the entire face is covered with the boards start at the bottom and install the rest of the fixings, 6 on the inside and 8 on the outside.
  • A full installation guide and specific junction details can be found here.
Technical Details

How much will you need?

  • UdiRECO boards are just over 1m². We suggest you allow 5-10% waste depending on how many corners or windows are involved.

What is their thermal conductivity?

  • The thermal conductivity of the boards is a combination of the two layers. The front, rigid layer has a conductivity of 0.048 W/mK and is always 40mm thick. The softer section at the rear varies, depending on the overall thickness but has a conductivity of 0.039 W/mK.

Suggested Construction Details

 Suggested construction details – Udi RECO Details

UdiRECO Installation Guide

UdiRECO 120 NBS Spec (external)

UdiINRECO NBS Spec (internal)

 

 

Product overview.

Where is it used?

  • Internally and externally, for new-build and retrofit on to all types of masonry. The board has a unique backing which moulds itself to uneven or rendered surfaces, avoiding the need to render walls flat first.
  • Undersides of very wavy rafters in old houses.

How is it used?

  • In short, by screwing it to the wall and rendering it. Simple. For the full guide please download here or read through the quick summary below.
  • Plan out your wall first. The first course of UdiRECO boards should start at least 300mm above the ground level, above the plinth insulation.
  • Measure the position of window openings so that there are no horizontal or vertical joints within 300mm of the corners of any openings. If this is not possible then the UdiSPECIAL ADHESIVE must be used to glue the joints in these areas.
  • UdiRECO insulation boards should be laid in horizontal rows, with the tongues pointing upward and loosely fixed with 2 UdiASSEMBLY fixings to begin with. Once the entire face is covered with the boards start at the bottom and install the rest of the fixings, 6 on the inside and 8 on the outside.
  • A full installation guide and specific junction details can be found here.

How much will you need?

  • UdiRECO boards are just over 1m². We suggest you allow 5-10% waste depending on how many corners or windows are involved.

What is their thermal conductivity?

  • The thermal conductivity of the boards is a combination of the two layers. The front, rigid layer has a conductivity of 0.048 W/mK and is always 40mm thick. The softer section at the rear varies, depending on the overall thickness but has a conductivity of 0.039 W/mK.

Suggested Construction Details

 Suggested construction details – Udi RECO Details

UdiRECO Installation Guide

UdiRECO 120 NBS Spec (external)

UdiINRECO NBS Spec (internal)

 

Material in action.

Here you can see an old stone building in Somerset being covered with the UdiRECO boards. Using the template we loan to our customers makes sure you only fix into stones and not waste time and fixings trying to fix in to the joints.

Prices & Shipping

Here you will find pricing and shipping estimates. To get a fixed quote, please call our technical team on 01392 861763 or get in touch via the form below.

UdiRECO wood fibre boards cost as per the below individual prices with a discount of 10% on full pallets.

Thickness [mm]Weight [kg/sqm]Board dim. [mm], Area [m²]Number of boards per palletPallet covers [sqm]Pallet weight [kg]Pallet dim.
[mm] [LxWxH]
single board costboard in full pallets
80121290 x 780, 1.018186701300 x 800 x 2000£34.60£31.14
100131290 x 780, 1.015156801300 x 800 x 2000£41.25£37.12
120141290 x 780, 1.013136701300 x 800 x 2000£46.30£41.67
140151290 x 780, 1.011116701300 x 800 x 2000£52.96£47.66
160161290 x 780, 1.010106701300 x 800 x 2000£57.04£51.34
180171290 x 780, 1.0996701300 x 800 x 2000£64.34£57.91
200181290 x 780, 1.0886701300 x 800 x 2000£69.06£62.16

Carriage is typically calculated at £130 + VAT per pallet and all orders will be sent on a pallet. This price does vary if delivery is required to remote locations. We are also able to stack pallets in some cases. If you require only a few boards we may be able to get slightly cheaper shipping so please contact us for a more accurate price.

Request an estimate.

In summary, if you are looking for more than just a builders’ merchant, we might be the guys to talk to.

Request an estimate.

In summary, if you are looking for more than just a builders’ merchant, we might be the guys to talk to.

CPD Training

We offer CPD training for architects practices across Devon and Cornwall.

Software Modelling

We offer CPD training for architects practices across Devon and Cornwall.

Building Plan Review

We offer CPD training for architects practices across Devon and Cornwall.

Overview

Back to Earth is a natural building material supplier. We're not your typical builders'​ merchant though and instead work closely with our clients during the planning, designing and building phases of projects.

Legal

Terms and conditions
Privacy & cookies policy
Data protection policy
Delivery information
Returns and exchanges

© 2018 Back to Earth

© 2018 Back to Earth